Edmund Optics^®

Thread adapters are used when connecting two components of different thread types. Learn more at Edmund Optics.

Quick demonstration with step-by-setup instructions for building an optical cage system swivel joint assembly.

Not sure how you can enhance an opical cage system? Check out examples of different design examples applicable for small and large systems at Edmund Optics.

Edmund Optics' fixed, adjustable, and kinematic mounting components can easily be integrated into optical systems.

The TECHSPEC® Vega™ Laser Line Beam Expanders from Edmund Optics® are divergence adjustable to compensate for input beam divergence.

Learn how to make repeatable adjustments in more than one direction for any demanding optics, imaging, or photonics application with this simple, three minute video.

Learn how to insert a liquid lens into a modular TECHSPEC Liquid Lens Cx Series Fixed Focal Length Lens Assembly from Edmund Optics.

Not all ruggedized imaging lenses feature the same type of ruggedization. Learn about the advantages and disadvantages of each type at Edmund Optics.

A Kinematic mount is classified by all degrees of freedom being fully constrained. Need a mount? Browse through the different variations at Edmund Optics.

Reduce the size and weight of your high magnification machine vision system with infinity corrected TECHSPEC® 120i Plan APO Infinity Corrected Objectives.

Continuing from where Part I: X-Y Setup ends, learn how to add a Z-axis to an existing X-Y configuration to achieve three degrees of freedom.

Interested in learning about the different types of camera mounts available from Edmund Optics?

Do you need to add linear translation to an optical cage system? Find step by step instructions for incorporating a linear translation assembly at Edmund Optics.

M12 or S-Mount lenses are a type of compact imaging lens used in space-constrained applications.

There are numerous mount types for connecting an imaging lens to a camera. Depending on the application, some mounts are more useful than others.

Mounting flat mirrors by their edges in a kinematic mount imparts stress onto the mirror surface. This results in distortion and reduced quality of the reflected wavefront, which is especially noticeable when using high-quality mirrors. Stemmed mirrors, on the other hand, are mounted from a smaller diameter “stem” protruding from the back of the mirror, resulting in significantly reduced stress on the mirror surface, high stability, and cost reduction and can be used as a replacement for a more expensive and complex kinematic mount and a conventional mirror.

Monolithic Reflective Beam Expanders are ideal for applications requiring broadband or achromatic beam expansion.

Learn how to assemble, align, and use a Mach-Zehnder Interferometer completely out of off-the-shelf products from Edmund Optics in this detailed guide.

Differential interference microscopy enhances the contrast of object features that are otherwise difficult to observe using brightfield microscopy.

Think you don't need telecentric illumination in machine vision applications? Find out why you need telecentric illumination at Edmund Optics.