Edmund Optics^®

The industry standard method for quantifying reflectivity does not tell the whole story

Schwarz Mirrors eliminate stray light using black, engineered fused silica substrates that maintain desired characteristics while absorbing unwanted light.

Edmund Optics' panel of laser optics experts discuss why the industry standard of measuring transmission to infer the reflectivity of high reflectivity laser mirrors doesn’t tell the whole story.

Mirrors are commonly used to fold or compact an optical system.

Mounting flat mirrors by their edges in a kinematic mount imparts stress onto the mirror surface. This results in distortion and reduced quality of the reflected wavefront, which is especially noticeable when using high-quality mirrors. Stemmed mirrors, on the other hand, are mounted from a smaller diameter “stem” protruding from the back of the mirror, resulting in significantly reduced stress on the mirror surface, high stability, and cost reduction and can be used as a replacement for a more expensive and complex kinematic mount and a conventional mirror.

Pulse Compression and Dispersion Compensation for Ultrafast Lasers

Learn how Highly-Dispersive Mirrors compensate for dispersion and compress pulse duration in ultrafast laser systems, which is critical for maximizing performance.

Schwarz Mirrors minimize unwanted stray light using an opaque, engineered fused silica substrate that absorbs light that would otherwise be transmitted.

Join Chris Williams as he briefly explains the basics of how to align a laser system onto a target.

Beam Conditioning Optics for UV, IR, and Broadband Lasers

Beam Shaping for High Power and Short Pulse Durations

When determining which laser to use for your application, consider the following specifications: wavelength, coherence length, beam divergence, and Rayleigh range.

Learn the key parameters that must be considered to ensure you laser application is successful. Common terminology will be established for these parameters.

Check out these best practices for handling and storing high power laser mirrors to decrease the risk of damage and increase lifetimes at Edmund Optics.

The Laser Optics Lab video series discusses laser optics concepts including specifications, coating technologies, product types, and more

Follow laser crystals through their entire manufacturing process from fabrication, to coating, to quality control in the Edmund Optics Florida facility.

The polarization state of a laser source is important for many different applications.