Nd:YAG Laser Line λ/20 UV Fused Silica Right Angle Prisms

Laser induced damage threshold (LIDT) denotes the maximum laser fluence an optical component can withstand with an acceptable amount of risk.

Anti-reflection (AR) coatings are applied to optical components to increase throughput and reduce hazards caused by back-reflections.

Optical coatings are used to influence the transmission, reflection, or polarization properties of an optical component.

Learn about the different types of optical prisms, their applications, and how to select the right prism for your specific system.

UV grade fused silica is ideal for UV and visible applications, but IR grade fused silica has better transmission in the IR due to a lack of OH- impurities.

There are many types of optical prisms. Find examples, information, and applications for different types of optical prisms at Edmund Optics.

Understanding the most commonly used laser optics materials will allow for easy navigation of EO’s wide selection of laser optics components.

Overspecifying optical losses in laser systems will not further improve your performance or reliability, but it could cost you additional money and/or time.

Laser induced damage threshold (LIDT) of optics is a statistical value influenced by defect density, the testing method, and fluctuations in the laser.

The surface quality of optical components the scattering off of its surface, which is especially important in laser optics applications.

An understanding of refraction and basic ray optics is a critical foundation for understanding more complicated optical concepts and technologies.

Not all optical components are tested for laser-induced damage threshold (LIDT) and testing methods differ, resulting in different types of LIDT specifications.

Learn the key parameters that must be considered to ensure you laser application is successful. Common terminology will be established for these parameters.

Testing laser induced damage threshold (LIDT) is not standardized, so understanding how your optics were tested is critical for predicting performance.

Metrology is critical for ensuring that optical components consistently meet their desired specifications, especially in laser applications.

Understanding the polarization of laser light is critical for many applications, as polarization impacts reflectance, focusing the beam, and other key behaviors.

The Laser Optics Lab video series discusses laser optics concepts including specifications, coating technologies, product types, and more

The Laser Optics Lab video series discusses laser optics concepts including specifications, coating technologies, product types, and more

Back reflections are created when some or part of your beam are reflected back to the source.

Optical coatings are composed of thin-film layers used to enhance transmission or reflection properties within an optical system.

When determining which laser to use for your application, consider the following specifications: wavelength, coherence length, beam divergence, and Rayleigh range.

Join our discussion around laser damage testing in the third episode of our LIGHT TALKS series.

Learn about trends in laser applications including increasing powers and decreasing pulse durations in this conversation with Kasia Sieluzycka and Nick Smith.

From tattoo removal to diagnosing cancer, lasers can transform our lives in countless ways. Join our conversation about laser in skin care and diagnostics.

Learn how to assemble, align, and use a Mach-Zehnder Interferometer completely out of off-the-shelf products from Edmund Optics in this detailed guide.

Edmund Optics® (EO) manufactures millions of precision optical components and subassemblies every year in our 5 global manufacturing facilities.

Learn about the metrology that Edmund Optics® uses to guarantee the quality of all optical components and assemblies.